Fillamentum Nylon CF15 Carbonl
Fillamentum Nylon CF15 is a Nylon based carbon fibres reinforced material for the FFF (also known as FDM) 3D printing technology.
It is characterized not only by high strength and high thermal or chemical resistance, but also better processing stability and rheological properties. The material has excellent impact resistance also with low temperatures. Typical is also low thermal expansion. This material is suitable for printing of frequently stressed parts, for example bearings etc.
Note: Nylon CF15 has abrasive properties. It means that it will accelerate the nozzle-wear of brass nozzles faster than unfilled filaments. The hardened steel nozzles are recommended.
Technical Data:
-
Diameter tolerance +/- 0.1mm
-
Filament diameter 1.75mm
-
Printtemperature: 235-260 °C
-
Headed Bed: 80-100 °C
-
Weight: 600g Filament (+250g sppol)
-
High impact resistance at low temperatures
-
High chemical resistance
-
High thermal resistance
-
Low thermal expansion
-
Density: 0.96 g.cm-3
-
Tensile strength: 54.5 MPa
-
Young's modulus: 500 MPa
-
Elongation at break: 103%
Product safety information
Manufacturer information:
Fillamentum Manufacturing Czech s.r.o.
Nám. Míru 1217
Hulín, Tschechien, 768 24
helpdesk@fillamentum.com
https://fillamentum.com
